770 Lt Galvanized Steel Waste Container

BODY AND COVER 1. The body will be bent from 1.8 x 2 mm single piece sheet metal and the body and sides will be pressed to increase its strength. The body side will be bent 1.5 cm and the corners will be manufactured with radius by grasping the body from the outside. 2. The body mouth will be surrounded with 25x50 mm U profile. 3. The body will be completely welded with gas metal arc welding without slag. 4. Lifting handles suitable for the lifting arms on the vehicle will be drilled from 4 mm sheet metal in 4 x 10 cm dimensions and 16 mm. round handle will be welded from top and bottom and welded to the body. 5. The lid will be plastered from a single piece of 2 mm sheet metal to increase its strength. 6. The lid will have an opening handle, a stop and a lock, and it will be manufactured with internal strength-enhancing profile reinforcement. 7. The container will be manufactured with standard and uniform continuous galvanized sheet metal in accordance with the technical drawing and technical specifications. 8. The galvanized sheet metal used should be CONTINUOUSLY HOT DIP COATED, STEEL CLASS DX51D, Zinc coated surface quality A and B, and should be produced in accordance with TS EN 10346 standard by production processes guaranteed as uniform from 25 microns to 300 microns. 9. Deformations made during manufacturing will be coated with 96% purity liquid zinc. Thus, embrittlement and deformation that occur in hot immersion should be avoided. 10. The name of the Municipality, a human figure throwing garbage and the slogan Let's Keep Our Environment Clean will be on the surface.